He ensures that the firing pin recess is facing upwards. Mk6 Mortar range table for charge 1 - Arma Docs for MC - Misfit Company f. The open end of the socket must continue to point in the direction of fire. The M375 cartridge uses the M90 propelling charge while the M375A2 and M375A1 cartridges use the M90A1 propelling charge. The assistant gunner cleans the bore and swabs it dry. The types of fuzes described in this paragraph are point detonating, proximity, mechanical time, multioption, and dummy. He lays for deflection, taking the proper sight picture. He rotates the socket so that the open end is pointing in the direction of fire. Washington DC 20310-0107, ADRP - Army Doctrine References Publications, ATTP - Army Tactics, Techniques, and Procedures, FY Publication Status Report (CAC required for access), Publishing Resources (CAC required for access), PC/PCO/FMO/EPCO Directory (CAC required for access), usarmy.pentagon.hqda-apd.mbx.customer-service@army.mil, GUN, MACHINE, CAL. During firing, the breech plug on the barrel is sealed and locked to the rotatable socket in the baseplate. The M374A2 and M374A1 cartridges are fitted with the M90A1 propelling charge. 4-4. He places his thumbs alongside the forefingers, being careful to keep both hands away from the muzzle. This round may be stored in a horizontal position. I have included my order history, detailed photos, as well as my personal opinion on International Military Antiques, IMA -USA www.ima-usa.com 81mm Display Mortar that they have for sale. He has the duty of preparing the ammunition and passing it to the assistant gunner. To make the shift, the gunner places the fingers of his right hand in the muzzle and his left hand on the left leg. (4) The bipod locking latch is locked, securing the barrel clamps. The M252 81 mm medium weight mortar is a British designed smooth bore, muzzle-loading, high-angle-of-fire weapon used for long-range indirect fire support to light infantry, air assault, and airborne units across the entire front of a battalion zone of influence. MFCS Mounted. The mount consists of elevating and traversing mechanisms and a bipod (Figure 4-4). If the primer of the ignition cartridge is dented, the first ammunition bearer attempts to replace the safety wire and places the round in a marked, safe location for disposal by ordnance personnel. The lower clamp is shaped and bored on each side to house the buffer cylinders. *FREE* shipping on qualifying offers. Placing the mortar in position at night does not relieve the gunner of the responsibility of checking for mask clearance and overhead interference. b. The first ammunition bearer shakes the barrel to dislodge any remnants from the last round fired, and he lowers the barrel into the rotating socket of the baseplate. TM - Technical Manuals (Range 9) TM - Technical Manuals (Range 10) TM - Technical Manuals (Range 11-4) TM - Technical Manuals (Range 11-5) . If the fuze does not function as set, it automatically functions at the next lower setting. It uses the M205 propelling charge, consisting of four horseshoe-shaped increments fitted around the tail. When the baseplate is in position, the first ammunition bearer lowers the breech plug into the rotating socket and rotates the barrel a quarter of a turn to lock it. The M889 HE cartridge (M252 onlyXUS Marine Corps) is of the same construction as the M821 cartridge in every detail except the fuze, which is the M935. The ammunition that can be fired by the 81-mm mortar, M252, is identified and described herein. 60mm, 81mm, and 120mm Mortar Increments with Ball Powder Propellants Standard A ammunition for the M29A1 mortar is Standard B for the M252 mortar (, Light green Yellow band with red markings. Overhead interference can be branches of trees or roofs of buildings. As soon as the sight data are announced, the gunner places it on the sight. The mortar should be within two turns of center of traverse when the task is compete. Short cartridges can be expected when firing below charge 4. The term "indirect fire" means firing at an enemy without having a. Rheinmetall Defence - mortar systems High explosive is used for both fragmentation and blast effect against personnel and light-skinned vehicles. The gunner should expose 6 inches (150 millimeters) of elevation shaft and center the buffer carrier. He uses the chain of command to assist him in effecting his command and supervising duties. He exposes 4 inches (100 millimeters) of elevation shaft and folds the handle. The first ammunition bearer holds the barrel until the assistant gunner has removed the mount. They are assembled with either an M524-series, M526-series, or M567 fuze. The cartridge is painted olive drab with yellow markings and weighs about 9.05 pounds. Agreed that mortars should generally be used close to the frontline. . (1) Marking on container. He may assist the gunner in shifting the mortar when the gunner is making large deflection changes. The gunner removes the sight and places it in the case with 3200 deflection and 0800 elevation indexed. Before the mortar is mounted, the squad must perform premount checks. News. Safety before firing is provided by a safety wire, which must be removed just before firing. If, upon removal of the safety wire, a buzzing sound in the fuze is heard, the round should not be used. The first table is a chart that shows range and elevation for firing particular mortar shells. d. When the barrel reaches the horizontal position, and not before, the assistant gunner moves the thumb of each hand over the muzzle. Burst Height. The adjustment ring has six raised ribs for use in conjunction with fuze setter, M25, and a setting indicator rib (marked SET) about half the height and width of the other six ribs. Additional information is included on an ammunition data card inside each container. It uses the M185 propelling charge that consists of eight increments fitted into the spaces between the fins and held by a propellant holder. When a large number of cartridges are needed for a mission, they may be removed from the containers and prepared. The cartridge is painted light green with black markings and one narrow brown band. They contain about 2.10 pounds of composition B explosive. (3) The securing strap is correctly located, securing the barrel clamps and buffers to the plain leg. a. 81MM SYSTEM | Hirtenberger Defense Systems M29, 81mm Mortar - Military Factory When set at SQ, the fuze functions on point impact or graze contact. The cartridge must not be fired below charge 3. It has four function settings: PRX (proximity) causes the cartridge to explode between 3 and 13 feet above the ground; NSB (near-surface burst) causes the cartridge to explode up to 3 feet above the ground; IM (impact) causes the cartridge to explode on contact; and DLY (delay) incorporates a 0.05-second delay in the fuze train before exploding the cartridge. The 81mm weapons platoon consisted of the headquarters platoon and four mortar squads. (3) The M84A1 fuze is a single-purpose, tungsten-ring, mechanical-time fuze used with the 81-mm M301A3 illumination cartridge. The pile is covered with a double thickness of tarpaulin. The gunner then kicks the barrel several times with his heel in an attempt to dislodge the round. FT 81-AI-3 Firing Tables Mortar, 81mm: M28A1 and M29 Mortar 81mm Self propelled M125A1 and M125 Carrier, 81mm Mortar Tracked XM755 [US Army.] The company level vehicles also carry a vehicle-mounted 120mm mortar, which is augmented by the 60mm M224 mortar for dismounted use. 120mm IHE grenade DM91. 107 Army Pentagon 9301 Chapek Road., Bldg.1458 (1) The barrel is clean and free from grease and oil both inside and out. c. Mechanical Time. The M252 is highly accurate up to ranges of 4500m to 5700m depending on the 0.30, BROWNING, M1919A4, M1919A5 AND M1919A6 {TO 39A-5 AF-32} (S&I BY PROP SEE DETAILS, FOOTNOTES), GUN, MACHINE, CAL. The gunner places the outer edge of the baseplate against the baseplate stake so that the left edge of the cutaway portion of the baseplate is aligned with the right edge of the stake (Figure 4-7). The powder increments, mainly, should not be exposed to direct sunlight. HE ammunition is used against personnel and materiel. The cannon assembly consists of the barrel that is sealed at the lower end with a removable breech plug, which houses a removable firing pin (Figure 4-3). Upon completion of any bipod movement on the barrel, the gunner ensures that the firing pin recess is facing upward. M224A1 60 MM LWCMS Mortar The 60mm mortar, M224A1 Lightweight Company Mortar System (LWCMS), is a smoothbore, muzzle loaded, high angle of fire weapon. The adjustment ring has six raised ribs for use in conjunction with fuze setter, M25, and a setting indicator rib (marked SET) about half the height and width of the other six ribs. It is used for records such as reports on condition, malfunctions, and accidents. He knocks down the near aiming post and proceeds to the far aiming post. See Chapter 3, paragraph 3-14 for a detailed discussion of malfunctions. A .mil website belongs to an official government organization in the United States. The cartridge can be fitted with the M524-series, M526-series, M567, or M532 fuzes. Several types of HE ammunition are used in the 81-mm mortar, M252. The Marines' Trusty Mortar Is Getting a Major Upgrade - Popular Mechanics (5) With the exception of a few unused increments (within the same ammunition lot number) as replacements for defective increments, excess powder should be removed from the mortar position. FT 81-AI-3 Firing Tables Mortar, 81mm: M28A1 and M29 Mortar 81mm Self The vertical cross line of the sight is on the left edge of the aiming point. The leg-locking handwheel must then be tightened by hand, ensuring the teeth on either side are correctly meshed. Secure .mil websites use HTTPS The squad leader stands behind the mortar where he can command and control his squad. The obturating ring ensures equal muzzle velocities in hot or cold barrels by keeping all the gases in the barrel until the cartridge has fired. e. The assistant gunner passes the round to the first ammunition bearer who inspects it for the cause of the misfire. It is a smooth-bore, muzzle-loading, high-angle-of-fire weapon used for long-range indirect fire support to light infantry, air assault, and airborne units across the entire front of a battalion zone of influence. In addition to supervising the emplacement, laying, and firing of the mortar, he supervises all other squad activities. Complete cartridges are always handled with care. An ammunition lot number is assigned to each ammunition lot, which is marked on each cartridge and packing container. .50: AP, M2 AND CARTRIDGE, CAL. The fuze wrench, M18, assembles the fuze to the cartridge, and the bladed tip on the end sets PD-type fuzes. If it gets wet or dirty, it must be wiped off at once. High angles of approach (near vertical) give the lowest burst heights. a. Joint Tables of Allowance; PB - Professional Bulletins; STP - Soldier Training Publications; TC - Training Circulars; . The components of the mortar consist of a canon, sight, mount, and baseplate. The fuze body is graduated from 0 to 50 seconds in 2-second intervals; 10-second intervals are indicated by bosses. It is fitted with a safety wire and pin that are removed immediately before firing. Mortar, 81mm M1 - Military Factory A spring-loaded locating catch is behind the elevating gear housing, which locates the plain leg in its supporting position for level ground. 4-10. Table 4-3. (2) The M84 fuze is a single-purpose, powder-train, mechanical-time fuze used with the 81-mm M301A1 and M301A2 illuminating cartridges. 0.50, BROWNING, M2; FIRING CARTRIDGE, ARMOR-PIERCING-INCENDIARY, CAL. It weighs about 9.05 pounds. He positions the lower barrel clamp against the lower stop band on the barrel and secures the upper barrel clamp. .50: BROWNING, M2 (HEAVY BARREL, FLEXIBLE) ON MOUNT, MACHINE GUN, TRIPOD MTD, CAL. FT 81-AI-3 Firing Tables Mortar, 81mm: M28A1 and M29 Mortar 81mm Self propelled M125A1 and M125 Carrier, 81mm Mortar Tracked XM755 General Dynamics Ordnance and Tactical Systems' 81mm Roll Controlled Guided Mortar (RCGM) provides an affordable, flexible solution to meet that need. (6) The primer cartridge is checked for damage or dampness. LARGE DEFLECTION AND ELEVATION CHANGES. It provides illumination for about 60 seconds with 600,000 candlepower illumination. SQUAD AND SECTION ORGANIZATION AND DUTIES, Each member of the infantry mortar squad has principle duties and responsibilities. (3) Markings on rounds. A plain leg is fitted to a stud on the elevating leg and is secured by a leg-locking handwheel. (3) From this train, extend a starting train that will burn against the wind of single increments laid end to end. a. The gunner checks the baseplate and ensures that--. Any target that requires that elevation, or a lower one, cannot be engaged from that position. It has no safety pins or wires to reduce preparation time. If the round fires, the mortar is re-laid on the aiming point and firing is continued. He indicates the initial direction of fire by pointing in that direction and commands ACTION. HE Guided Mortar is in development. With the clamps facing away from him, the assistant gunner traverses the buffer carrier to the traversing handwheel and folds the handle. Identification. Despite its weight though, the 81mm mortar was an important part of the Table of Organization and Equipment of U.S. Army and U.S. Marine Corps maneuver battalions throughout World War II. He moves the mortar until the vertical line of the sight is aligned approximately on the aiming post. M252 81mm Mortars The M252 81mm medium extended range mortar (see diagram below) is a crew-served, smooth bore, muzzle loaded, high angle of fire weapon system. The propelling charges are assembled around the fin assembly shaft. If the barrel is hot, the gunner may then apply water to the outside of the barrel until it is cool. The ignition cartridge strikes the firing pin and detonates, which causes a flash that passes through the radial holes in the shaft. The firing pin must be replaced and the bore swabbed. With the mortar mounted and the sight installed, the gunner lays the sight on the two aiming posts (placed out 50 and 100 meters from the mortar) on a referred deflection of 2800 mils and an elevation of 1100 mils. News. Excess increments should not accumulate near the mortar positions but are removed to a designated place of burning and destroyed. In the U.S. Army and U.S. Marine Corps, it is normally deployed in the mortar platoon of an infantry battalion. This may preclude moving the bipod. Cartridges assembled with the M524 (A1, A2, A3, or A4) fuze are for use by the U.S. Marine Corps and U.S. Navy only. In addition to loading, he swabs the bore after 10 rounds have been fired or after each fire mission. 81mm, 82 mm & 120 mm Medium and Heavy Mortars - GICHD d. The gunner removes the sight from its case, mounts it on the mortar, and sets a deflection of 3200 mils and an elevation of 1100 mils. f. Ammunition should be stored under cover. PDF Principles of Fire Support B2c2437 Student Handout .50: BALL, M2 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR WEAPON, 5.56MM, M16A1 WEAPON, 5.56MM, M16A2 WEAPON, 5.56MM, M249 AND WEAPON, 5.56MM, M4 FIRING CARTRIDGE, BALL, M855 CARTRIDGE, TRACER, M858 CARTRIDGE, BALL, M193 CARTRIDGE, TRACER, M196 (S&I BY PROP SEE DETAILS, FOOTNOTES), MACHINE GUN, 7.62-MM: M60 ON MOUNT, MACHINE GUN: 7.62-MM, M122 AND MACHINE GUN, 7.62-MM: M73 ON TANK, COMBAT, FULL-TRACKED: 105-MM GUN, M60 SERIES AND RIFLE, 7.62-MM: M14; FIRING CARTRIDGE, 7.62-MM, BALL, NATO, M59; CARTRIDGE, 7.62-MM, BALL, NATO, M80; CARTRIDGE, 7.62-MM: AP, NATO, M61 AND CARTRIDGE, 7.62-MM: TRACER, NATO, M62 (REPRINTED W/BASIC INCL C1) (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 8-Q-1 FOR PROJECTILE, HE, M404 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 8-J-4 FOR PROJECTILE, HE, M404 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 8-T-1 FOR PROJECTILE, HE: M509A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 8-INCH HOWITZER, M201A1 ON HOWITZER, HEAVY, SELF-PROPELLED, 8-INCH, M110A2 FOR LOW ANGLE FIRING PROJECTILE, HE, M509A1 USING REGISTRATION DATA FOR PROJECTILE, HE, M106 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 8-INCH HOWITZER: M2 AND M2A1 ON HOWITZER, HEAVY, TOWED: 8-INCH, M115; CANNON, 8-INCH HOWITZER: M47 ON HOWITZER, HEAVY, SELF-PROPELLED, FULL TRACKED: 8-INCH, M55; CANNON, 8-INCH HOWITZER: M2A1E1 ON HOWITZER, HEAVY, SELF-PROPELLED: 8-INCH, M110; FIRING PROJECTILE, HE: M106 AND PROJECTILE, CHEMICAL: M426 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 8-INCH HOWITZER, M201 ON HOWITZER, HEAVY, SELF-PROPELLED: 8-INCH, M110A1 AND CANNON, 8-INCH HOWITZER, M201A1 ON HOWITZER, HEAVY, SELF-PROPELLED: 8-INCH, M110A2 AND FIRING PROJECTILE, HE, M106 PROJECTILE, CHEMICAL, M426 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 8-INCH HOWITZER: M201A1 ON HOWITZER, HEAVY, SELF-PROPELLED, 8-INCH, M110A2; FIRING PROJECTILE, HE, RA; M650 AND PROJECTILE, ATOMIC: M753 AND M753A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 8-INCH HOWITZER, M201A1 ON HOWITZER, HEAVY, SELF-PROPELLED: 8-INCH, M110A2 FIRING PROJECTILE, HE, M509A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 14.5-MM GUN, M31; ARTILLERY TRAINER FIRING FUZED CARTRIDGES, M181, M182 AND M183 (S&I BY PROP SEE DETAILS, FOOTNOTES), GUN, 20-MM, AUTOMATIC, M139; FIRING CARTRIDGE, 20-MM, HEIT, M599; CARTRIDGE, 20-MM, TPT, M206 AND CARTRIDGE, 20-MM, APIT, M601 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 25MM GUN, M242 ON INFANTRY FIGHTING VEHICLE, M3 FIRING CARTRIDGE, APDS-T, M791 CARTRIDGE, HEI-T, M792 CARTRIDGE, TP-T, M793 CARTRIDGE, TPDS-T, M910 (S&I BY PROP SEE DETAILS, FOOTNOTES), GUN, AUTOMATIC, 40-MM, M1 AND GUN, DUAL AUTOMATIC, 40-MM, M2; FIRING CARTRIDGE, HE-T, SD, MK 2 WITH FUZES, PD, MK 27, M64A1, M71 OR NO. The fuze consists of a brass head, body assembly, and expelling charge. Disposal Precautions. Each cartridge weighs about 10 pounds and is provided with the M223 propelling charge, consisting of four horseshoe-shaped increments fitted around the tail. M120/M121 120 mm Mortar. ), FIRING TABLES FOR CANNON, 155MM HOWITZER, M185 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1B HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A2 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3B AND HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A4 AND CANNON, 155MM HOWITZER, M284 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A5 AND HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A6 AND CANNON, 155MM HOWITZER, M199 ON HOWITZER, MEDIUM, TOWED, 155MM, M198 AND CANNON, 155MM HOWITZER, M776 ON HOWITZER, MEDIUM, TOWED, 155MM, M777A1 FIRING PROJECTILE, HE, M483A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR, CANNON, 155MM, HOWITZER, M185 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, 109A1 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, 109A1B HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A2 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3B AND HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, 109A4 AND CANNON, 155MM, HOWITZER, M284 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, 109A5 AND HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, 109A6 AND CANNON, 155MM, HOWITZER, M199 ON HOWITZER, MEDIUM, TOWED, 155MM, M198 AND CANNON, 155MM HOWITZER, M776 ON HOWITZER, MEDIUM, TOWED, 155MM, M777A1 FIRING PROJECTILE, HERA, M549 PROJECTILE, HERA, M549A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 155MM HOWITZER, M185 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1B; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A2; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3B; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A4 AND CANNON, 155MM HOWITZER, M284 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A5, M109A6 AND M109A7 AND CANNON, 155MM HOWITZER, M284A2 CHROME ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A6 AND M109A7 AND CANNON, 155MM HOWITZER, M199 ON HOWITZER, MEDIUM, TOWED, 155MM, M198 AND CANNON, 155MM HOWITZER, M776 ON HOWITZER, MEDIUM, TOWED, 155MM, M777, M777A1 AND M777A2 AND CANNON, 155MM HOWITZER, M776 CHROME ON HOWITZER, MEDIUM, TOWED, 155MM, M777A2 FIRING PROJECTILE, HERA, M549 AND PROJECTILE, HERA, M549A1 (S&I BY PROPONENT, SEE DEAILS, FOOTNOTES. a. a. These cartridges are used first in subsequent firing so that once-opened stocks can be kept to a minimum. Army Publishing Directorate - Details Page The equipment is placed out the same as for the gunner's examination (Chapter 9). This round must be stored in a vertical position. (1) The rotating socket is free to move in a complete circle. The fuze body is graduated from 0 to 25 seconds in 1-second intervals; 5-second intervals are indicated by bosses. That is generally how I use mortars. d. The gunner rough levels the cross-level bubble by making the bubble bounce from one side to the other. (c) The gunner determines mask and overhead clearance by sighting along the barrel with his eye near the breech plug. The squad leader picks up the sight case and the two aiming posts, and moves to the exact position where the mortar is to be mounted. The assistant gunner attempts to maintain the traversing mechanism on a horizontal plane. It was even a tool used by airborne units, and was dropped in parachute bundles during Operations Neptune, Market Garden, and Varsity. The assistant gunner places his right hand palm up (1 inch from the muzzle end) under the BAD and his left hand palm down (1 inch from the muzzle end) on top. 4-12. The barrel clamp, which consists of an upper and lower clamp, is situated at the top. Increments removed from cartridges before firing should be placed in a metal or wooden container located outside the firing vehicle/position at least 25 meters away. The elevation change announced must be less than 90 mils and more than 35 mils. For those of you in the market for a Dummy/Display 81mm mortar, I hope this article can answer a few of your questions before you order. It is set using the bladed end of the M18 fuze wrench. 251 MK 1 AND CARTRIDGE, AP-T, M81 AND M81A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), RIFLE, 57-MM, M18, M18A1 AND T15E16; FIRING CARTRIDGE, HE, M306A1 AND CARTRIDGE, TP, M306A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), RIFLE, 57-MM, M18, M18A1 AND T15E16, FIRING CARTRIDGE, HE, AT, M307A1, MUZZLE/VELOCITY, 1200 F/S (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 60MM, M224 FIRING CARTRIDGE, HE, M720 CARTRIDGE, HE, M720A1 CARTRIDGE, HE, M49A4 CARTRIDGE, HE, M888 CARTRIDGE, HE, M768 CARTRIDGE, HE, XM1046 CARTRIDGE, HE, M1061 CARTRIDGE, WP, M50A3 CARTRIDGE, WP, M302A2 AND M302A1 CARTRIDGE, WP, M722 CARTRIDGE, WP, M722A1 CARTRIDGE, ILLUM, M83A3 CARTRIDGE, ILLUM, M721 CARTRIDGE, IR, M767 CARTRIDGE, FRPC, M769 CARTRIDGE, TP (SR), M766 (S&I BY PROP SEE DETAILS, FOOTNOTES) (REPRINTED W/BASIC INCL C1), FIRING TABLES FOR MORTAR, 60MM: M224 MORTAR, 60MM: M224A1 FIRING CARTRIDGE, HE, M720A1 CARTRIDGE, HE, M768 CARTRIDGE, HE, M720 CARTRIDGE, HE, M720A2 CARTRIDGE, HE, M768A1 CARTRIDGE, WP, M722 CARTRIDGE, WP, M722A1 CARTRIDGE, HE, M888 CARTRIDGE, HE, M49A4 CARTRIDGE, TP, M50A3 CARTRIDGE, HE, M1061 CARTRIDGE, HE, XM1046 CARTRIDGE, WP, M302A1 CARTRIDGE, WP, M302A2 CARTRIDGE, ILLUM, M721 CARTRIDGE, ILLUM, M83A3 CARTRIDGE, IR ILLUM, M767 CARTRIDGE, TP(SR), M766 CARTRIDGE, FRPC, M769 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 60-MM, M224; FIRING CARTRIDGE, HE, M888 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 60MM, M224, FIRING CARTRIDGE, HE, M888 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 60 MM, M224 FIRING CARTRIDGE, HE M488 (S&I BY PROP SEE DETAILS, FOOTNOTES), RIFLE: 75-MM, M20 (T25); FIRING CARTRIDGE, PHE, M310 AND M310A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), GUN, 76-MM, M32 ON TANKS, 75-MM GUN, M41 AND M41A1 AND GUN, 76-MM, M48 (T124E2) ON CARRIAGE, 76-MM, M29 (T66) FIRING SHOT, AP-T, M339 SHOT, TP-T, M340 SHOT, HVAPDS-T, M331A1 AND M331A2 SHOT, HVAP, T66E4 SHELL, HE, M352 SHELL, WP, M361 (T140E2) (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM: M29A1, M29 AND M1; FIRING CARTRIDGE, HE, M362 CARTRIDGE, HE, M43A1 AND TP, M43A1 CARTRIDGE, WP, M57 AND M57A1 CARTRIDGE, ILLUMINATING, M301A1 AND M301A2 CARTRIDGE, ILLUMINATING, M301A3 (REPRINTED W/BASIC INCL C1-7) (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR 81-MM: M29 AND M2 FIRING CARTRIDGE, HE, M43A1 WITH FUZE, PD, M525 FUZE, PD, M52A2E3 (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR: 81-MM, M29 AND M1 ON MOUNTS, MORTAR: 81-MM, M23A2, M23A1, M23, M4 AND M1; FIRING SHELL, HE: M43A1 AND M43A1B1; SHELL, TP: M43A1 AND M43A1B1 WITH FUZE, PD: M52B10; FIN, M3; CARTRIDGE, IGNITION: M8; PRIMER, PERCUSSION: M34 AND INCREMENT, PROPELLANT: M1A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM: M29A1 AND M29; MORTAR, 81-MM, SELF-PROPELLED: M125A1 AND M125; CARRIER, 81-MM MORTAR: TRACKED, XM755; FIRING CARTRIDGE, HE: M374A2 AND M374; CARTRIDGE, WP, M375A2 AND M375; CARTRIDGE, ILLUMINATING: M301A3; CARTRIDGE, TRAINING: M68 AND TRAINING DEVICE, M1 (REPRINTED W/BASIC INCL C1-4) (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM: M29A1 AND M29; FIRING CARTRIDGE, HE, M374A2 AND M374; CARTRIDGE, WP, M375A2 AND M375 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 81MM, M29 AND M1 FIRING CARTRIDGE, ILLUMINATING, M301A3 WITH FUZE, TIME, M84A1, HEIGHT OF BURST, 600 METERS (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM, M29A1 AND M1; FIRING CARTRIDGE, ILLUMINATING, M301A2 WITH FUZE, TIME: M84A1 HEIGHT OF BURST, 381 METERS (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM: M29A1 AND M29; FIRING TRAINING DEVICE, 81-MM: M1 SABOT WITH CARTRIDGE, TP, M744 (CHARGE 1); CARTRIDGE, TP, M745 (CHARGE 2); CARTRIDGE, TP, M746 (CHARGE 3), CARTRIDGE, TP, M747 (CHARGE 4) (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM: M29A1 AND M29 AND FIRING CARTRIDGE, HE: M374A3 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE FOR MORTAR, 81-MM: M29A1 AND M29; MORTAR, 81-MM, SELF-PROPELLED: M125A1 AND M125; CARRIER, 81-MM MORTAR: TRACKED, M755 M755 AND FIRING CARTRIDGE, HE, M374A3 (REPRINTED W/BASIC INCL C1) (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 81MM, M252, M252A1, AND M252A2 FIRING CARTRIDGE, HE, M821; CARTRIDGE, HE M889; CARTRIDGE, RP, M819; CARTRIDGE, ILLUMINATING, M853A1; CARTRIDGE, TP, M879; CARTRIDGE, TP, M879A1; CARTRIDGE, HE, M821A1; CARTRIDGE, HE, M821A2; CARTRIDGE, HE, M821A3; CARTRIDGE, HE, M821A4; CARTRIDGE, HE, M889A1; CARTRIDGE, HE, M889A2; CARTRIDGE, HE, M889A3 (PROV); CARTRIDGE, HE, M889A4; AND CARTRIDGE, IR ILLUMINATING, M816; AND MORTAR, 81MM, M29A1 AND MORTAR, 81MM, M252, M252A1, AND M252A2 FIRING CARTRIDGE, TP (SR), M880 (S&I BY PROP SEE DETAILS, FOOTNOTES), MORTAR, 81-MM, M29A1, M29, AND M1; FIRING CARTRIDGE, TRAINING, M68 (S&I BY PROP SEE DETAILS, FOOTNOTES), RIFLE, 90-MM: M67 AND FIRING CARTRIDGE, HEAT, M371 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 105MM GUN, M68 AND M68A1 ON TANK, COMBAT, FULL TRACKED: 105MM GUN, M1, M60A3, M60A1, M60 AND M48A5; FIRING CARTRIDGE, APFSDS-T, M900; CARTRIDGE, APFSDS-T, M833; CARTRIDGE, APFSDS-T, M774; CARTRIDGE, APFSDS-T, M735; CARTRIDGE, APDST, M728; CARTRIDGE, APDST-T, M392A2, M392A1, AND L36A1; CARTRIDGE, HEAT-T-MP, M456A2; CARTRIDGE, HEAT-T, M456A1 AND M456; CARTRIDGE, HEP-T, M393A2 AND TP-T, M393A1; CARTRIDGE, WP-T, M416; CARTRIDGE, APERS-T, M494; CARTRIDGE, TPDS-T, M724; CARTRIDGE, TP-T, M490A1; CARTRIDGE, TP-T, M490 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 105-H-6 FOR CARTRIDGE, HE, M444 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 105-AS-2 FOR CARTRIDGE, HE, M444 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 105-AS-4 FOR CARTRIDGE, HE, DPICM, M915 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 105MM HOWITZER, M137A1 (M137E1) AND M137 ON HOWITZER, LIGHT, TOWED, 105MM, M102 AND CANNON, 105MM HOWITZER, M20A1 ON HOWITZER, LIGHT, TOWED, 105MM, M119A1 FIRING CARTRIDGE, HE, M1 CARTRIDGE, GAS, PERSISTENT, H AND HD, M60 CARTRIDGE, GAS, NONPERSISTENT, GB, M360 CARTRIDGE, SMOKE, WP, M60, M60A1 AND M60A2 CARTRIDGE, SMOKE, HC AND COLORED, BE, M84A1 CARTRIDGE, ILLUMINATING, M314A3 CARTRIDGE, HEP-T, M327 CARTRIDGE, ANTIPERSONNEL, M546 CARTRIDGE, HEAT-T, M622 CARTRIDGE, HE, M760 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 105MM HOWITZER, M137 AND M137A1 ON HOWITZER, LIGHT, TOWED, 105MM, M102 AND CANNON, 105MM HOWITZER, M20A1 ON HOWITZER, LIGHT, TOWED, 105MM, M119A3 FIRING CARTRIDGE, HERA, M548 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 105MM HOWITZER, M20A1 ON HOWITZER, LIGHT, TOWED, 105MM, M119A1 FIRING CARTRIDGE, HERA, M913 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 105MM HOWITZER, M137 AND M137A1 ON HOWITZER, LIGHT, TOWED, 105MM, M102 AND CANNON, 105MM HOWITZER, M20A1 ON HOWITZER, LIGHT, TOWED, 105MM, M119A3 FIRING CARTRIDGE, HERA, M927 (S&I BY PROP SEE DETAILS, FOOTNOTES)-, CANNON, 105-MM HOWITZER: M2A2 AND M2A1 ON HOWITZER, LIGHT, TOWED: 105-MM, M101A1 AND M101 AND CANNON, 105-MM HOWITZER: M49 ON HOWITZER, LIGHT, SELF-PROPELLED, FULL-TRACKED, 105-MM: M52A1 AND M52; FIRING CARTRIDGE, HE: M1; CARTRIDGE, GAS PERSISTENT, H AND HD, M60; CARTRIDGE, GAS, NONPERSISTENT, GB, M360; CARTRIDGE, SMOKE, WP, M60; CARTRIDGE, SMOKE, BE, M84 AND M84B1 (HC AND COLORED); CARTRIDGE,SMOKE, HC, BE, M84A1 (M84E1); CARTRIDGE, ILLUMINATING, M314A3 (M314A2E1); CARTRIDGE, HEP-T, M327; CARTRIDGE, ANTIPERSONNEL, XM546 AND CARTRIDGE, HEAT-T, M622 (S&I BY PROP SEE DETAILS, FOOTNOTES), RIFLE, RECOILLESS, 106MM, M40, FIRING, SHELL, HEAT, M344 (S&I BY PROP SEE DETAILS, FOOTNOTES), GUN, 106-MM RECOILLESS RIFLE, M40A1 ON MOUNT, M79; FIRING CARTRIDGE, 106-MM: HEAT, M344 (S&I BY PROP SEE DETAILS, FOOTNOTES), RIFLE, 106-MM, M40 FIRING CARTRIDGE, HEP-T, M346 (S&I BY PROP SEE DETAILS, FOOTNOTES), GUN, 106-MM RECOILLESS RIFLE, M40A4 AND M40A2 ON MOUNT, M79; FIRING CARTRIDGE, ANTIPERSONNEL, XM581 WITH FUZE, MT, XM592E1 AND CARTRIDGE, ANTIPERSONNEL, M581 WITH FUZE, MT, M592 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 120MM GUN, M256 ON TANK, COMBAT, FULL TRACKED: 120MM GUN, M1A1 FIRING CARTRIDGE, APFSDS-T, M829 CARTRIDGE, APFSDS-T, M829A1 CARTRIDGE, APFSDS-T, M829A2 CARTRIDGE, APFSDS-T, M827 CARTRIDGE, APFSDS-T, DM13 CARTRIDGE, HEAT-MP-T, M830 CARTRIDGE, HEAT-MP-T, M830A1 CARTRIDGE, HEAT-MP-T, DM12 CARTRIDGE, TPCSDS-T, M865 CARTRIDGE, TPCSDS-T, M865 PIP CARTRIDGE, TPFSDS-T, M866 CARTRIDGE, TPFSDS-T, DM28 CARTRIDGE, HEAT-TP-T, M831 CARTRIDGE, TP-T, M831A1 CARTRIDGE, HEAT-TP-T, DM18 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 120MM: CARRIER-MOUNTED M121 MARTAR, 120MM: TOWED M120 FIRING CARTRIDGE, HE, M934 CARTRIDGE, HE, M934A1 CARTRIDGE, HE, M933 CARTRIDGE, WP, XM929 CARTRIDGE, WP, M929 CARTRIDGE, ILLUM, XM930 CARTRIDGE, IR ILLUM, XM983 CARTRIDGE, FRPC, M931 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 120MM: CARRIER-MOUNTED RMS6L (BCT STRYKER) FIRING CARTRIDGE, HE, M934 CARTRIDGE, HE, M933 CARTRIDGE, HE, M934A1 CARTRIDGE, WP, XM929 CARTRIDGE, WP, M929 CARTRIDGE, ILLUM, M930 CARTRIDGE, ILLUM, M930E1 CARTRIDGE, IR ILLUM, M983 CARTRIDGE, FRPC, M931 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR MORTAR, 120MM: TOWED M327 FIRING PROJECTILES, HE, M1101 PROJECTILES, SMOKE, WP, M1103 PROJECTILES, ILLUMINATING, M1105 PROJECTILES, PRACTICE, M1107 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 152-MM GUN LAUNCHER: M81E1 AND M81 ON ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL TRACKED, 152-MM, M551; FIRING CARTRIDGE, 152-MM: HEAT-MPT, XM409E5; CARTRIDGE, 152-MM: TP-T, XM411E4 AND XM411E3; CARTRIDGE, 152-MM: HE-T, XM657E2; CARTRIDGE, 152-MM: CANISTER, XM625 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 152-MM GUN-LAUNCHER: M162 ON TANK, COMBAT, FULL-TRACKED: 152-MM, M60A2; FIRING CARTRIDGE, 152-MM: HEAT-T-MP, M409; CARTRIDGES, 152-MM: TP-T, M411A1 AND M411 AND CARTRIDGE, 152-MM CANISTER, M625 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AR-2 FOR PROJECTILE, SMOKE, M825 AND PROJECTILE, SMOKE, M825A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AK-2 FOR PROJECTILE, HE, M483A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AM-2 FOR PROJECTILES, HE, M449A1 (M449E2) PROJECTILES, HE, M449 (T379) PROJECTILES, HE, M449E1 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 155-AN-1 FOR PROJECTILE, HE, M483A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AN-2 FOR PROJECTILES, HE, M483A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 144-ADD-K-1 FOR HOWITZER, ORGANIZATIONAL, MEDIUM, SELF-PROPELLED, 155-MM, M109, M109A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AN-1 FOR PROJECTILE, HE, M692 AND PROJECTILE, HE, M731 (REPRINTED W/BASIC INCL C1-2) (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AN-2 FOR PROJECTILES, HE, M692 PROJECTILES, HE, M731 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AK-2 FOR PROJECTILE, HE, M692; PROJECTILE, HE, M731 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AN-1 FOR PROJECTILE, ANTITANK, M718 AND M741 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AN-2 FOR PROJECTILES, ANTITANK, M718 AND M718A1 PROJECTILES, ANTITANK, M741 AND M741A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AK-2 FOR PROJECTILE, ANTITANK, M718 AND M741 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AN-2 FOR PROJECTILES, SMOKE, M825 AND PROJECTILES, SMOKE, M825A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AM-2 FOR PROJECTILE, HE, M483A1 USING REGISTRATION DATA FOR PROJECTILE, HE, M107 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AM-2 FOR PROJECTILES, HE, M483A1 USING REGISTRATION DATA FOR PROJECTILES, HE, M107 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 155-AM-3 FOR PROJECTILE, HE, M483A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLE ADDENDUM TO FT 155-AM-2 FOR PROJECTILES, SMOKE, M825 AND PROJECTILES, SMOKE, M825A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), ADDENDUM TO FT 155-AM-3 FOR PROJECTILE, SMOKE, M825 AND PROJECTILE, SMOKE, M825A1 (S&I BY PROP SEE DETAILS, FOOTNOTES), PROVISIONAL AIMING DATA ADDENDUM TO FT 155-ADD-AU-PAD FOR PROJECTILE, HE, M864 (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 155-MM HOWITZER, M126A1 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155-MM, M109 AND CANNON, 150MM HOWITZER, M1A2 ON HOWITZER, MEDIUM, TOWED, 150MM, M114A2 FIRING PROJECTILE, HE, M483A1 (REPRINTED W/BASIC INCL C1) (S&I BY PROP SEE DETAILS, FOOTNOTES), CANNON, 155MM HOWITZER, M185 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1 HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1B HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A2 AND HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3 AND CANNON, 155MM, HOWITZER, M199 ON HOWITZER, MEDIUM, TOWED, 155MM, M198 FIRING PROJECTILE, HE, M107 PROJECTILE, SMOKE, WP, M110, PROJECTILE, SMOKE, BE, M116, M116B1 (HC AND COLORED) PROJECTILE, SMOKE, BE, M116A1, (HC) PROJECTILE, GAS, PERSISTENT, H AND HD, M110 PROJECTILE, GAS, NONPERSISTENT, GB, M121A1 PROJECTILE, GAS PERSISTENT, VX, M121A1 PROJECTILE, ILLUMINATING, M485A2 AND M485A1 (REPRINTED W/BASIC INCL C1) (S&I BY PROP SEE DETAILS, FOOTNOTES), FIRING TABLES FOR CANNON, 155MM HOWITZER, M185 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A1B; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A2; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A3B; HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A4 AND CANNON, 155MM HOWITZER, M284 ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A5, M109A6 AND M109A7 AND CANNON, 155MM HOWITZER, M284A2 CHROME ON HOWITZER, MEDIUM, SELF-PROPELLED, 155MM, M109A6 AND M109A7 AND CANNON, 155MM HOWITZER, M199 ON HOWITZER, MEDIUM, TOWED, 155MM, M198 AND CANNON, 155MM HOWITZER, M776 ON HOWITZER, MEDIUM, TOWED, 155MM, M777, M777A1 AND M777A2 AND CANNON, 155MM HOWITZER, M776 CHROME ON HOWITZER, MEDIUM, TOWED, 155MM, M777A2 FIRING PROJECTILE, HE, M107; PROJECTILE, SMOKE, WP, M110, M110A1 AND M110A2; PROJECTILE, SMOKE, BE, M116A1 (HC); PROJECTILE, ILLUMINATING, M485A2 AND M485A1; AND PROJECTILE, IR ILLUMINATING, M1066 (S&I BY PROPONENT, SEE FOOTNOTES.
Intermediate Woodworking Projects,
Maax 3 Panel Sliding Shower Door Installation,
1978 Monte Carlo 4 Speed For Sale,
Paine Construction Knoxville,
Articles OTHER
81mm mortar range table